|
East central Indiana | Went through same thing with similar setup. Leave row width at 45” and 4 rows so your acreage comes out correct. Find your population configuration and change that number. It will start out at 1.00 and you change it to adjust what population reads. Don’t remember which way to adjust, but the 1.00 is essentially 100%. Seems like one of mine is 110% and one is 65% depending on planter.
Sensors on my 750 will be dead on with wheat, but be way off on beans. Been like that on several monitors…
Think It is either population adjust or population gain in a setup configuration tab. If you can’t find it let me know and I will look at my 1200. | |
|
Ag Leader population issue
