|
Hennepin, IL | Not real sure, cant say I've run into that. A few things you can check. Curious what software version the 20/20 is on. If it isnt on either 2020.0.1 or 2020.0.4, I'd update first. Also, do you have any of the populations youre running in the preset box? Or are you just setting it in the white box on the control page and going? If all your presets are high, say like soybean populations, it could be looking for the closest one first before settling on the actual. That happens with a monitoring only system, but I thought vDrive went off the commanded pop. Cant say I've set one up, including my own, without having a pop that was either close or the one I'm using in the presets.
1. Make sure radar is calibrated
2. In Setup->Crops make sure Seeds To Average is 300
3. Also in the crops tab, make sure Seeds Per Disk is 27. I'm sure it is if its planting right, but double check.
4. Make sure you've zeroed the gyro in the PDM.
Thats all just off the top of my head. If it doesnt do it every time you start a field, Id see if you could narrow down something youre doing at the end of the previous field through the beginning of the current field to see if there's something youre doing or not doing to trigger that. | |
|
PP VDrive over populating
