|
NE Indiana | Put a new sprayer in our gator. Running it with a greenstar rate controller. If I manually run the control valve it gains pressure fast and drops fast when I close it. But in automatic it never gets on rate it actually never really moves. If I go into nozzle flow check I can set my speed to 10 and gpa to 10 and it will be good. If I change the speed to 9 it takes about 30 seconds to get to the target rate. Then if I put my speed back to 10 it will never move. Do I have a bad rate controller? I have the valve cal at 2123 which is what’s on the tag | |
|
Very frustrating greenstar rate controller problem.
