AgTalk Home
AgTalk Home
Search Forums | Classifieds (68) | Skins | Language
You are logged in as a guest. ( logon | register )

what mxiture are people using with spot sprayer tech on kochia?
View previous thread :: View next thread
   Forums List -> Crop TalkMessage format
 
Triticum Agricolam
Posted 5/15/2025 13:43 (#11225835 - in reply to #11225710)
Subject: RE: what mxiture are people using with spot sprayer tech on kochia?



Eastern Washington State
I have a WeedIt, we have kochia where I'm at, but its not nearly the problem it is other places. RoundUp + Group 4s still works well on it for us. Early in the summer here is what I've been using with my WeedIt:
- 32 oz RT3 or equivalent
- 8 oz LV-6
- 2.66 oz Dicamba
- 1 qt LI700
- 5 qt/100 liquid AMS - this is how much I need to treat the hardness of my water, your water might need a very different amount.
- 7.5 GPA

Later in the summer I switch over to a paraquat based mix, this is not a cheap mix and not something you are going to want to spray broadcast over every acre, but with a spot sprayer its liquid fire. Its three modes of action and completely different than my mixes I use earlier in the season. I'm not messing around when it comes to herbicide resistance.
- 32 oz Paraquat
- 8 oz 2 lb Bromoxynil
- .8 oz Vida or Aim - Vida requires a water pH below 5.0, I treat my water with citric acid to get it below 5 beforehand.
- 2 qt/100 High surfactant oil concentrate
- 3 gal/100 UAN
- 5 qt/100 liquid AMS - - this is how much I need to treat the hardness of my water, your water might need a very different amount.
- 30 GPA

For my very last application of the summer when I'm applying to < 5% of the field I'll increase the paraquat/Vida to 32 oz/1.2 oz. I don't know if it necessary but when so few acres are getting sprayed its cheap insurance.

Edited by Triticum Agricolam 5/15/2025 13:48
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)