|
Eastern WA | Well I don’t trust the notches on our 455s so we usually do a catch test to get rates dialed in. The link is to a seeding rate calculator. So just plug in your lbs per acre and play with your spacing numbers (6,12, & 18”) and figure out what you should catch out of one seed tube over X number of feet. We usually do 200’ runs for wheat and CRP seed. Just pop a couple tubes off each box and rubber band a bag on the end. Make your run and then weigh the bags. We have found that different boxes will need to be at different notches to get the right rate.
https://www.seedrite.com/seed_rate/
| |
|
John Deere 455 Grain Drill Seeding Rate Question
