|
NW KS/ SC ID | For anyone curious what I'm asking about, I'm not sure how many manufacturers used these factory, but White pushed the 9 bolt dual longer and higher power and bigger diameter than about any manufacturer, so they might have been the only ones that offered these spools.
Agco calls them plates. Here's a couple screenshots from a 2-135/155 Series 3 parts book under the dual wheels section.
I ended up finding the part number on eBay and have a set coming cheaper, local Agco dealer has them priced at around 16 bucks apiece. Not the end of the world, but x18 I figured I'd try to save some $.
 (Screenshot_20250512-112558.png)
 (Screenshot_20250512-112635.png)
 (Screenshot_20250511-155712.png)
 (Screenshot_20250511-155108.png)
Attachments
----------------
 Screenshot_20250512-112558.png (150KB - 2 downloads)
Screenshot_20250512-112635.png (138KB - 2 downloads)
Screenshot_20250511-155712.png (134KB - 2 downloads)
Screenshot_20250511-155108.png (122KB - 2 downloads)
| |
|
updated wheel bolts for 9 bolt duals
