|
Kiukainen, Finland | Like others have written a good power source is vital for an EZ-Steer system. I once had problems with a bad battery to ground contact. So wirwring directly to battery is now allways enough...
EZ-Steer system does not take a lot of current, something like 8 - 10 Amps max if steering is heavy. But it is very, very sensitive to low voltage.
There are two different 750 displays: the old CFX/FM-750 and the new GXF-750.
I only have the old CFX-750 and have learned from experince that it might start actin funny if the limited internal memory is getting to be full. So please delete all unneccesary coverage logging files from the display.
A reboot also might help sometimes if you have problems.
Often times it can be just a wrong configuration. For example setting a drawbar pull type implemet to "three point hitch" will make funny things if the implement is something like 3 m = 10 feet behind.
| |
|
Trimble 750 and ez steer Fast RTK
