|
| Half mile rows will run 1 to four inches to the left to start....and then sporadically gradually drift 5 to six inches to the left and maybe come back to 1 inch to the left or move to 8 to 10 inches to the left...and then just for good measure, it may come back to 0 or even 1 inch to the right and then back to 2 to 4 inches to the left. All this happens gradually . Since it spend most of its time to the left, I have moved the receiver on top of the cab to the left of center about 4 inches, which is about the average of the deviation.
I used this ez steer with a Trimble 500 and Omnistar for a few years when i strip tilled 20 years ago and it was better than what this 750 is doing now, | |
|
Trimble 750 and ez steer Fast RTK
