|
NW IL | What do you have specified under your serial port B settings?
Notice when differential is set to RTK, port B is not shown Under general tab, set the differential to WAAS. Now port B should be available.
For RTK, under serial B , the only NMEA string that should be on is GGA. All other strings should be off. Set update rate to 1HZ. I think it should be set to 38,400 baud (honestly can’t remember the baud).
Once B is set up, set differential type to RTK external (port B settings will then disappear) .
Try ntrip again and see what happens. | |
|
IC1200/7500 connected to mncors, no rtk throughput
