|
SE MN | Incommand 1200 with 7500 gps
Trial rtk activation code entered today, under GPS Information/Receiver it says Yes next to RTK unlocked, so that must have worked
Brmini with data through DAC, connected with my phone and data works, so that must be working
1200 has wifi dongle and under Wireless Networking it shows connected to br1minihotspot so that must be working
Have an account through mncors
Under NTRIP Client Settings I entered the server and port that I was given and picked a stream. Status says Connected so that makes me think I am connected to mncors
Which stream is an open question, i tried AGRTM34 based on recommendation here, also tried CMR_Plus_NAD83(2011) recommended by my dealer. When I change it GPS Information immediately updates and says Connected next to NTRIP Status, so that seems fine
In all the fiddling, RTK Throughput has never changed from 0%.
Differential source is RTK External, but i haven’t seen guidance for what to select on Port A page. My dealer said this should not be happening so that was helpful.
I’m sure it is one silly thing, thanks for any help
I have the extra cable from antennae Port B to aux disply connector.
One strange thing is all the instructions say baud rate 38400, but under Port A, the rate is 460800 and greyed out so I can’t change it.
I just updated the 1200 firmware to 10.5 and there is no change, rtk throughput still 0%
Edited by john holland 5/6/2025 20:28
 (IMG_8443 (full).jpeg)
 (IMG_8442 (full).jpeg)
 (IMG_8441 (full).jpeg)
Attachments
----------------
 IMG_8443 (full).jpeg (86KB - 3 downloads)
IMG_8442 (full).jpeg (89KB - 2 downloads)
IMG_8441 (full).jpeg (105KB - 1 downloads)
| |
|
IC1200/7500 connected to mncors, no rtk throughput
