Posted 4/25/2025 20:48 (#11202791 - in reply to #11202645) Subject: RE: Drilling grain Sorgum
Southeast Colorado
We've got an SDX drill with 360 bushel cart. Even with the "fine" rollers..........about 8 to 9 lbs is as low as we can go...........which works out fine for Sudan. But for Milo...........they make an even "finer" roller. I forget what it's technically called??
I'd think with a coarse roller there's no way you're not putting seed on WAY too thick.
Drilling grain Sorgum
