Central Illinois | Rowcropcattleman - 4/25/2025 13:04
You had a lot of options when you cut it. Now you have little. 3/4 diesel and 1/4 remedy is only thing that’s going to work. Tordon is at cutting.
When I cut them, I use an old "brace" auger style bit to drill a hole in the stump and fill with undiluted roundup (cut the "wedge" off to make the shaft straight and use a battery drill).
Using the bit now would give some fresh wood again.
https://www.theenglishwoodworker.com/the-ultimate-cordless-drill/
Edited by Ron (Cen. IL.) 4/25/2025 16:26
|
spray for cut stumps
