Viewing a thread - Raven 450 0 rate when applying

You are logged in as a guest. ( logon | register )

Raven 450 0 rate when applying	View previous thread :: View next thread
Forums List -> Precision Talk	Message format

Red7230

Posted 4/22/2025 11:35 (#11198435 - in reply to #11198309)
Subject: RE: Raven 450 0 rate when applying

SW MN

We put in a new console cable and that fixed the issue. I will tear into the old cable later and see if I can find a bad connection on pin 13 just so I can have a spare cable laying around.

Raven 450 0 rate when applying - Red7230 : 4/21/2025 20:42
- RE: Raven 450 0 rate when applying - JD630 : 4/21/2025 21:40
  - RE: Raven 450 0 rate when applying - Red7230 : 4/22/2025 06:49
    - RE: Raven 450 0 rate when applying - tedbear : 4/22/2025 07:07
      - RE: Raven 450 0 rate when applying - Red7230 : 4/22/2025 07:19
        
        RE: Raven 450 0 rate when applying - tedbear : 4/22/2025 07:49
        
        RE: Raven 450 0 rate when applying - Red7230 : 4/22/2025 07:59
        
        RE: Raven 450 0 rate when applying - tedbear : 4/22/2025 08:14
        
        RE: Raven 450 0 rate when applying - Red7230 : 4/22/2025 08:31
        
        RE: Raven 450 0 rate when applying - tedbear : 4/22/2025 09:56
        
        RE: Raven 450 0 rate when applying - Red7230 : 4/22/2025 11:35

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)