|
| Look at the big valve block that sends oil to both the vacuum fan and the seed drives on the RH side of the planter....you should see a couple valves sticking out the valve body that are NOT on the LH valve body....one is a relief valve and the other is an unloading valve. Try tapping on them with a hammer....sometimes they get stuck and dump all the pump flow from the PTO pump. In the picture, the LH two valves are what you are looking for...the other one is what the other valve body should have in place of them.
 (20240306_191003 (full).jpg)
Attachments
----------------
 20240306_191003 (full).jpg (112KB - 3 downloads)
| |
|
2013 1250 planter electrical issue
