Jeffersonville, OH | Iamwill - 4/13/2025 13:19
If I recall correctly the bank is stamped for identification. Our 9695 did something similar many years ago and the tc was replaced under warranty. No problems since. You could try keeping the controller cool using gel packs to see if it keeps working for a longer period of time. When ours went out it worked fine until it got hot and then it threw all sorts of codes. After it cooled down it would work again for a bit and then quit again.
Valve is Marked on the RH side of the tractor. MC1 and MC2 are at the bottom...but if you're getting all those codes, you have wiring or TCM issues most likely.
Chris |
Solenoid Failure Light-Funk 18spd Tranny- Agco 9690
