|
SW Iowa | We fixed a few tile suck holes this weekend and typically have used a 4" connector inside the clay tile on both ends, and tile taped bother ends with good luck. On the last hole, of course, we dug nearly 5 feet deep and found a crude Y made to tie 2 tile lines (it was more intact than shown, took pic one hammer swing too late). Anyways, the large section with running water appears to be a 6" line, and the small section that Y's in appears to be 5". Does anyone have some creative ideas that work well for tying these together? Going to rummage through the local tile dealer to see if I can find some adapters without breaking the bank.
Edited by robbertsfarms 4/7/2025 07:29
 (IMG_8476 (full).jpg)
 (IMG_8477 (full).jpg)
 (IMG_8478 (full).jpg)
Attachments
----------------
 IMG_8476 (full).jpg (229KB - 12 downloads)
IMG_8477 (full).jpg (193KB - 13 downloads)
IMG_8478 (full).jpg (188KB - 14 downloads)
| |
|
Clay Tile Fix
