|
North Central OH | With standard flow you are going to have to stick with a cutter don't know of a mulcher that will work satisfactory on standard flow. That being said I've been looking around at them, do any dealers around you carry anything? Local short dealer has a tar river serious duty brush cutter 6" capacity that I'm considering because they have it and I can look at it. Build doesn't seem to bad, ironcraft appears to have some that are very similar as well, have also looked online at skidpro and virning. Wouldn't be afraid of any of these, seems all the good heavy ones have a double layer blade carrier with short blades sandwiched between them, the spindle and motor designs is where they seem to vary. I know this probably doesn't help much. | |
|
Skid steer mulcher/brush cutter recommendations
