|
East central Ohio | I have it installed with the y splice and terminator, I found one in my box of stuff. Now I can't get it to spray. Won't open electric ball section valves. I am using the existing switches with the agleader adapter cable to the AIM. But I'm not sure I hooked it up right. I've read, re read, and read it again but doesn't make sense to me. Can anyone tell me which wire u remove on switches and replace with adapter harness wire? I removed wire that goes to switches and replaced with harness wire, but in my head that doesn't make sense. It makes more sense to remove power wire so current can go from adapter wire through switch and out to valve. Unless I'm totally thinking wrong. Thanks for the help. My head is starting to hurt. Lol | |
|
Direct command
