|
| You will probably need to contact a New Holland dealer for the part number. Instrument panels were not available from New Holland for several years but New Holland finally came with one the last year or so. The parts catalogs does not list that part number.
When the panels were not available, a person in PA came up with a kit to install a newer instrument panel in the old loaders. He sold them on ebay. I may have his number somewhere but could not find it in a quick search. If interested, you can probably reach him by going to Haytalk.com and register for the forums. Once registered you will see a green square with your initial in it towards the top of the forum. Click on the green square. Then you can click on start a conversation. His online identifier is PaMike. He sold a bunch of those kits and they were much cheaper than what NH wants for the new panels.
While on haytalk.com, go to the machinery forum. At the top of the list of threads click on My NH Repair etc. You will be taken to the first post, if not, navigate to the first post. You should see an index of all the posts in that thread with links to take you to that particular post. If you do not see the list, scroll down the first post and you will see "See More". Click on see more. Scroll down the list to the skid loader section and you will find wiring schematics for the various NH loaders. The LX and LS models are what are similar to the Deere. These simple drawings are drawn from the hard to follow NH printed schematics in the manuals. The drawings are for the starting circuit only. The drawings break down each step in starting the engine. The LX and LS drawings are close to the same, only the LS drawings are all in one pdf, where the LX are in individual pdfs. | |
|
John deere 8875 skid steer
