|
| Some people are probably going to object to this but we have a 2 inch ball valve and cam lock fitting on a 120 gallon air compressor. Got a 25 ft 2 inch hose that was rated higher than 165 psi. Attached a short pipe that has the end crushed down to the end of the hose. One man holds the pipe in position while someone else opens and closes the valve all in one motion. You want to have a GOOD hold on the hose and be sure the person running the valve understands about getting it turned off right away again! It works great but be very careful. We’ve never had any serious injuries from it but you definitely could if you let it get away from you. We’ve never run into a tire it wouldn’t seat. | |
|
Ag tire bead seater
