Viewing a thread - Vector Pro to Pro700 for mobile mapping

Forums | Classifieds (86) | Skins | Language

You are logged in as a guest. ( logon | register )

Vector Pro to Pro700 for mobile mapping	View previous thread :: View next thread
Forums List -> Precision Talk	Message format

agkcc

Posted 3/25/2025 07:44 (#11160966 - in reply to #10146408)
Subject: RE: Vector Pro to Pro700 for mobile mapping

Have to use port b and move pin 2 to 1 and pin 3 to 12 then in pro 1200 under gnss output turn on Receiver Serial Port
#1 output and turn nema message on at 5hz

Vector Pro to Pro700 for mobile mapping - IH686 : 3/17/2023 19:42
- RE: Vector Pro to Pro700 for mobile mapping - DawsonFarms : 3/17/2023 22:19
  - RE: Vector Pro to Pro700 for mobile mapping - IH686 : 3/18/2023 08:02
- RE: Vector Pro to Pro700 for mobile mapping - swenzel : 3/18/2023 09:32
  - RE: Vector Pro to Pro700 for mobile mapping - IH686 : 3/18/2023 09:54
    - RE: Vector Pro to Pro700 for mobile mapping - swenzel : 3/18/2023 10:18
      - RE: Vector Pro to Pro700 for mobile mapping - IH686 : 3/18/2023 13:46
        
        RE: Vector Pro to Pro700 for mobile mapping - agkcc : 3/25/2025 07:44

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)