|
Fargo ND | Same thing going on here, finishing half a shop with sliding doors.
Priced out a 22x14 schweiss and it was 11k. No tin, not insulated, just the door.
Priced a diamond door and that had windows, tin, 3” insulation. That came out about 9k at the time.
My problem is my doors are on the side and only 14ft. Bifold will cut into my height and won’t leave me enough clearance to get the combine in. We’re going to try and seal the slider with Snirtstopper seals. Not ideal but it’s what we got. | |
|
Going to finish other half of shop. Opinions on doors
