|
CMN | It’s either electrical issue or you have a signal check stuck open dumping signal line pressure to the compensator on main hyd pump. Most times the function that works is the one that is the issue because it’s dumping signal pressure when a different function sends it being there all tied together.
I would be curious if you cap the signal line coming from the steering hand pump on the right side of the transmission and then tried your remotes or hitch.
Still don’t understand why trans pressure is low. It’s not even in the same circuit. When you put new priority valve on did you adjust the trans pressure to spec. I would imagine you would have to do that. | |
|
2009 case ih magnum 275 hydraulic issues
