|
| I put my tires on without a press
1. Put 16 tractor weights on a pallet and screw a 2×12 across the bottom
2. Put 2 railroad blocks on floor and lay the poly rim side down
3.Lay metal rim side on top of tire
4. Lay 1 tractor wheel spacer on centered
5. Lay 1 railroad block across the top
6. Squash it down with the pallet loaded with weights
The wheel spacer needs to be slightly bigger than the metal rim but smaller than the tire outer lip
 (20250215_165356 (full).jpg)
 (20250215_165336 (full).jpg)
 (20250215_165153 (full).jpg)
 (20250214_110612 (full).jpg)
Attachments
----------------
 20250215_165356 (full).jpg (242KB - 59 downloads)
20250215_165336 (full).jpg (243KB - 58 downloads)
20250215_165153 (full).jpg (251KB - 61 downloads)
20250214_110612 (full).jpg (227KB - 59 downloads)
| |
|
Easy planter gauge wheel tire mounting
