|
| Well, I think I got it figured out. On the banjo wire loom if you just use the black and red connected to the Raven, yellow and green the valve will work as I need for a Raven system. What I found out my issue was is that the batteries in my truck must be weak. I was troubleshooting in the mornings and was not running the truck. It was supplying good volts but apparently not good amps. I know because I was using a volt tester to try and troubleshoot my problem. Today it was a little warmer out and I started to truck to run the air conditioner as I worked on it. What I found is that the valves worked flawlessly. | |
|
Banjo Regulating Valve Wiring Question
