|
| After testing this morning, what I'm noticing is that my Raven, yellow and green wires when not in use are grounded and are not floating.
My controller is an old 440. With two individual display boxes. It appears it has standard control, which sends 12 V to either green or yellow. And it appears that it has fast close which is only sending 6 V.
I'm not sure with this Banjo motor why I can't have the two grounds grounded and have both directions operate. It's as if there's two motors in this valve, but they are connected in some way. | |
|
Banjo Regulating Valve Wiring Question
