Jeffersonville, OH | smallchev - 2/10/2025 09:53
Had warning light come on for what I think was for the auxiliary hyd filter clogging or the high pressure transmission oil filter clogging. Operator didn't think any error codes came up. Is there any way to check what it could have been for? I pulled both filters and they look clean. Wondering if it could possibly be a bad sensor? Thanks
Those are different lights, and filters...One is Orange, one is red if memory serves correctly. Can you take a picture of the light, or tell me which of the ones I attached it was?
Also, if you hold the UP arrow on the steering column panel for 5 seconds, you can get into the Service menus...go to the TC Errors and DCC Err sections, and you can read the codes...if they haven't been cleared recently, you could have a LOT you never knew about.
Chris
 (dta-wsm-11-en-1 (full).png)
 (dta-wsm-11-en-2 (full).png)
 (dta-wsm-11-en-3 (full).png)
Attachments
----------------
 dta-wsm-11-en-1 (full).png (109KB - 1 downloads)
dta-wsm-11-en-2 (full).png (123KB - 1 downloads)
dta-wsm-11-en-3 (full).png (105KB - 1 downloads)
|
Challenger Mt655b?
