Viewing a thread - Linear bearing question.

You are logged in as a guest. ( logon | register )

Linear bearing question.	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Old Pokey

Posted 2/25/2007 16:26 (#110902 - in reply to #110848)
Subject: Lift from the bottom.........

Brian, ya I want to lift the tire from underneath. I think Cliff SEIA built a cool setup for carrying duals to the tractor. The width of the tundras and the small diameter of the wheel are the reason I'm looking at the rollers from underneath method. What do you have in mind?

Linear bearing question. - Old Pokey : 2/25/2007 10:41
- RE: Linear bearing question. - Jack G : 2/25/2007 11:18
  - That's what I was afraid of....... - Old Pokey : 2/25/2007 11:34
- RE: Linear bearing question. - myron : 2/25/2007 11:21
  - Yes, but they do not like dirt - Applicator : 2/25/2007 11:35
    - Here's what i want to do with them........ - Old Pokey : 2/25/2007 11:43
      - I thought you had enough buggies that tire changes would not be needed. - Grasseed : 2/25/2007 13:59
        
        Somebody took my booms, so I have to change tires now... - Old Pokey : 2/25/2007 16:27
        
        Booms - Grasseed : 2/25/2007 18:18
      - Don, Are you wanting - Brian in E Ore : 2/25/2007 14:56
        
        Lift from the bottom......... - Old Pokey : 2/25/2007 16:26
        
        My Idea - Brian in E Ore : 2/25/2007 18:31
        
        We're pretty close on the thinking,.........I think. - Old Pokey : 2/25/2007 20:00
        
        Another Idear - Brian in E Ore : 2/25/2007 20:50
        
        Whoa, now that's an interesting tractor setup.... - Old Pokey : 2/25/2007 21:22
      - RE: Here's what i want to do with them........ - Oliver1 : 2/25/2007 21:58
  - Can I used mild 1018 round, or........ - Old Pokey : 2/25/2007 11:37
- Whatcha bildin? (Edited again) - Tim in WI : 2/25/2007 11:46
  - Plastic will likely be part of it too...... - Old Pokey : 2/25/2007 11:51
- Maybe something like - dutch : 2/25/2007 13:01
  - RE: Maybe something like - braidy : 2/26/2007 19:08
- Re: Linear bearing question. - nebfarmer : 3/1/2007 19:34

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)