|
Aberdeen MS | My goose neck is a 6 pin. I just tapped into the tail light assembly (brake and turns are combined) on the Pete and put an extra plug in the back.
I added the GN ball at the back of the frame for the GN, sits lower than the 5th wheel, and my clearance with the Pete's back axle was tight for the mud flap clearance. Also, this way, I don't have to change the GN from the PU to the Pete for height of the latch.
I have a flat blade 7 to 6 pin converter, but don't think I've seen a 7 round to a 6 round, probably out there someplace tho. | |
|