NE Ark. | Artic - 2/3/2025 12:48
Af far as I know the external NMEA input can not be used for autosteer on trimble gadgets. Only the very old EZ-Guide plus can do it.
NMEA ssould work for section control, yield mapping etc...
Thanks. I don't care about autosteer. This is for leveling with two rovers. Can both receivers in the FMX be fed NMEA at the same time, or only one of them? Andy
Edited by andya 2/3/2025 15:28
|
FMX and dual NMEA input?
