central - east central Minnesota - | Luke the Duke - 2/1/2025 12:42 I would like to get a skid loader, brush mower attachment any suggestions? Pros and cons of different brands and styles? I am hoping somebody on here has had good and or bad luck with different ones so I don’t have to make the same mistake lol
Lot of good makes listed above . . . . Do Not Buy On Price Alone. You get what you pay for. The brush cutter needs to be matched with your skid steer / hydraulic power. If not, it will not matter, it will not preform and you'll be frustrated with the cut and capacity. Here are a few other very good brands. Brush Wolf (Cross-Tech mfg), Diamond mowers (commercial grade), Jenkins, Virnig mfg, are a few in the upper midwest. They all need to match your machine to their mower. The narrower the better. I have a brush wolf brand, it is 60 inch low flow for my 247b hydraulic flow. It's 6 inches narrower then the machine. It's not a big deal. In brush, you'll only use half the width to cut with to maintain enough power to cut. In grass, sometimes its the same, not taking a full cut to cut better/faster. So, don't be too hung up on getting the "biggest" one out there. Check on the price of replacement blades too, some are far less money then others . . . . |
Skid loader brush mower
