|
Jeffersonville, OH | Right, which is my hesitation that the SteerCommand can talk to that valve. Even the Steercommand instructions show the SA module, which I'm not sure how that would work.
I have a Geosteer and the legacy SC stuff here. I'll power them up in the morning and see what I can find for vehicle settings for CAT tracked tractors in there. I also have some newer Paradyme harnesses with the ECU 4 and not the SA module, maybe I can figure out if this is possible for you
EDIT: Actually I have the SC valve harness with a 4 pin and 10 pin connector for the Trimble valve this one came off of, maybe that's what you need. Still would need a good vehicle to use, so I'll investigate that in the morning.
Chris
Edited by c_mayer 1/31/2025 16:39
| |
|
Agleader Hyd. Steering questions
