|
SC MN | I ran steadysteer on it last year and after a bit of tuning got it working good but definitely not on the level I was used to from the geosteer. I can see it had a paradyme on the roof before the geosteer which was on it when I bought it so I didn’t set it up. I’m wondering if it is the same valve as the trimble kit because the legacy valve interface cable looks like it would plug into this valve. It has a 10 pin deutsch and a 4 pin weather pack.
I have another use for the steadysteer which is why I’m wanting to make this steer through the valve.
Edited by Luap 1/31/2025 15:12
| |
|
Agleader Hyd. Steering questions
