Winkler, Manitoba Canada | WCWI - 1/23/2025 18:03
So WTW and Erik how many tons are your presses rated at and how thick of steel can you bend say 24 inch wide, been thinking of making a break of some sort.
I attached a bending chart provided by Iroquois to the bottom of my original post. Theoretically we could bend 7/16" x 24" material on a 3" die. Thicker if narrower. 100 ton press as I stated in the first post.
Edited by WTW 1/23/2025 20:59
|
Press break attachment for shop press
