Fudd - 1/23/2025 17:24
Looking for suggestions on a press break for a 50 ton Dake press that we have. Been looking at a SWAG 30" press break part number 30PB. Also found a Edward's press break model #WBB3169663 part number PRB60. Witch one is a better unit to buy. Open to suggestions doesn't have to be either of these two. Would like to buy something around 30" wide just to have the option to bend digger pieces if need.
Edwards PRB60 is not a press brake...it is only a mounting kit.
Some options listed. Depending on the material 50 ton will limit what can be formed. We purchased the 24" Iroquois brake to use in our 100 ton press.
https://baileigh.com/metalworking/presses/press-tooling-accessories/hsp-bp24-24-press-brake-attachment
https://iroquoisiron.com/product/24-press-brake/
https://iroquoisiron.com/product/32-press-brake/
https://edwardsironworkers.com/24-press-brake-tooling
https://edwardsironworkers.com/32-press-brake-tooling
Edited by WTW 1/23/2025 20:57
Attachments
----------------
 A36 Brake Tonnage Chart-1.pdf (44KB - 66 downloads)
| 
Press break attachment for shop press
