central iowa | c_mayer - 1/23/2025 08:05
If you have the oil at the right level, above 70%, that pump should be submerged...it will prime itself...we have never primed one, have probably changed 15-20 pumps.
So you know you don't have oil because your remotes/SCV's don't work, is that correct?
Do you have any way of testing pressure? Standby pressure should be roughly 319psi if nothing is activated. I can attach the pressure testing procedures if you need them
Chris
Shade over 28 gallons in it right now. NO hydraulic functions at all, brakes, 3 point, park lock, or remotes. Mechanic even had me check fuses to make sure something didn’t blow upon putting batteries back in and knock the console switches offline (however after uncaging the brakes and not having hydraulic pressure there he said that obviously couldn’t be it). Thanks for the offer on testing, but when it comes to that i will just have mechanic come down and bring his hose with him to hook up to load sense and we will give that a try as well as checking pressures, but i am confident there is no pressure at all. I am going to prime in a bit just to be sure, but doesn’t sound like you are giving much hope for that, hoping mine is a fluke and it works lol. |
Agco dt225b hydraulic pump dilemma
