Hello,

Without getting into computer specifics, this happened here since its been below freezing for a couple days..

Water froze, has frozen somewhere from tank, (sock, pickup tube, lines along frame...)...and if no further damage is done...she'll be ok when it thaws...unless, it froze ahead of fuel pump, or within fuel pump (talking water)... and pump ran continuously, and burned it out...you should still hear pump prime for about 2 seconds every time key is cycled,...if not...no sound does not sound good...:_)

Using a clamp on Ammeter may help you trouble shoot as to whether you have current draw when key is cycled...

I you have a way to get her inside would help too.

Hope this Helps,

CF