Pine City, MN | GT500KR53 - 1/20/2025 14:09
I had to replace the o rings on the same part on our 8345r
I removed filters after draining the oil out of that sump housing, I can't remember which hose comes off on the opposite side that drains that housing,,
But you remove a hose to drain that housing first and then you can remove that pipe without removing the hyd pump setup,,
It's highly recommend to remove the priority valve from the pump housing and replace all the internal o rings that go bad while the oil is drained also
When the wheels are set on 30" spacing it was recommended to remove them to get room to work on this project, I think it can be done without but I had time to make it easier
Circled priority valve
I’ve done both with the tires set on 30”. But it would’ve been much easier with them removed though. |
Jd8285r hydraulic filter housing leak
