|
| As terralex mentioned if you're dropping down to 2 pieces of the pie something is up, Could be canbus voltages, bare wire up by the receiver plug, really common on -00 and -20 series tractors with dealer installed Greenstar as alot of them were. Had a customer with a 7920 JD that did this, we jumped seat switch, swapped his 1800 for a g5 display he had and it worked, then we replaced seat switch. Went back to the 1800, still wouldn't work. Even though the tractor was showing no active "SSU" faults, the code was still stored and we had to clear it multiple times, then it took off. You can see those if you put the diagnostic fuse in and scroll thru controllers to the SSU and then pull the codes.
If it is dropping off the canbus and loading back on because of a bad connection you could see those symptoms.
Make sure your 6000 is up to date, 4.60H. 4.40P had some issues recently. | |
|
Deere gps kicks out / shuts off
