AgTalk Home
AgTalk Home
Search Forums | Classifieds (26) | Skins | Language
You are logged in as a guest. ( logon | register )

How to do a compression test and leak down test on Chevy small block quesions.
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
davpal
Posted 12/12/2024 11:41 (#11006065 - in reply to #11006049)
Subject: RE: How to do a compression test and leak down test on Chevy small block quesions.


Mid Michigan
You don't have to open the throttle at all to do a compression test. If you don't believe me try it both ways. I've got a compression and a leakdown tester. The leakdown tester is kind of worthless. I rarely used it over the years. All it does is allow you to add pressure to the cylinders with your air compressor and see how it holds it. If you have a leak you can sometimes hear it. The compression tester should tell you pretty much everything you need to know if you test all 8 cylinders. If they all test at about 130-140 lbs you probably have a pretty decent engine. BUT, just because all the cylinders test ok an old engine could still have quite a bit of blowby and use some oil.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)