| Cb854 - 11/19/2024 05:59
What to y drop some, maybe 2x2 on the planter also trying to feed the corp efficiency
We put some in the 2x2 as well. You will want to verify what you can mix with it. Sulfates for us were ok. But we kept it separate from N, ATS and 10-34-0. So second system was needed,, another tank, valves, flowmeter, pump = more dollars invested, more headaches to keep running - during the planting process. We got no yield response from doing it. IMHO, its going to comeback down to what your K levels are in the soil. You mentioned strip til in the other thread about this. That would be a no brainer too me. Put it there. Simple, dollar efficient and if you are gonna get a yield increase from Y drop - you will get it there without the expense and hassle.
If you decide to go forward with it, plan on removing your strainers or going to like a 20 mesh. The small ones will plug up with some left over residue.
Take care
Edited by NEIAAG 11/19/2024 06:42
|
Melting potash
