1 1/4 mile south of Tedbear | Depends on what you are looking for.
If your just looking for coverage what you have will work.
The harness you have will supply speed (round 3 pin) to your 440.
The main harness that you have should have a single red wire labeled Remote switch.
Connect it to the orange with white stripe wire in the 440 harness.
This will turn on/off mapping with the master switch.
If you want to map as applied (actual application rate/acre) you will need to find a newer 440, 450, or 660 that has the serial port.
 (Screenshot 2024-11-18 073147 (full).jpg)
Attachments
----------------
 Screenshot 2024-11-18 073147 (full).jpg (18KB - 1 downloads)
|
Raven CR7 to SCS440NVM adapter
