|
NW KS | The trimble valve kits come with an autosense in the box to use for the install. There should be a Vehicle profile available for the NAVII that is setup for an 8010 with autosense. Far as I know the profiles are the same for a Case or Trimble system that uses a navII. Only difference is the firmware flashed on the NavII box. You can also change the sensor type with autopilot tool box but changing profiles is easier if there is on available with the steering sensor you want to use.
Part Number for the trimble valve kit is 54038-25. You will also need a hose kit or have your own hoses made up. I was hopping I still had a pdf copy of the installation installation manual for that kit on my computer or phone but so far I haven't found it. I glanced at the autosense part of the manual but never installed it since a Reichhardt system was installed rather than a Case or Trimble.
There is a New old stock 54038-25 kit on ebay right now. | |
|
8010 autosteer valve
