co2shaun - 11/6/2024 08:59

Trimble kit is what I used on a neighbors machine. We were able to find a New in box kit a a decent discount but it took a year or two. I paired it with a used Reichhardt system. Went with Reichhardt since you can use most any GPS receiver with it and there is no unlock for row guidance. It also runs on the existing touch screen via ISOBUS VT. Angle sensor was a little bit of an issue to get mounted since everything is under the machine and the steering cylinders are to the front of the axle. I wasn't sure how well the angle sensor would hold up mounted in front of the axle but so far no trouble and it has been 2-3 years. If you go with trimble or a Case-IH system that uses a NavII you can go with an autosense angle sensor.