Posted 11/6/2024 08:19 (#10954822 - in reply to #10953938) Subject: RE: 8010 autosteer valve
cyclones30 - 11/5/2024 18:57
JAnderson - 11/5/2024 13:36 Screen, receiver, steering wheel, wiring harness, 7 spline adapters, ~7 anti rotation brackets, several nuts for the steering column, wheel angle sensor. Fairly universal right out of the box
Sounds like the OP wants integrated steering.
Plus, using a Pro600 or 700 is a TERRIBLE way to get into it when other options are available
I prefer integrated steering. I want it set up like the newer machines we have using the pro 700. Easier for the machine drivers if they are all the same. Just researching options. This is more or less going to be a spare machine so if it's gonna be $25k I'll have to look into other options.
8010 autosteer valve
