|
East Central, Nebraska | i know nothing about deere rate control but other brands will ask you in the settings if you want to leave the rate unchanged when it is shut off. it sounds like yours is going back to zero. i would play around with the settings and see if you notice anything there. hard to believe that a fast valve would react so slow but maybe your moving pretty good. another setting to take a look at would be the look ahead setting, once again i know nothing about deere but other controller brands will get an early start if you set them to. if it were mine i would play around with settings, its possible you have a fast valve but it is still set to open at the speed of a normal valve. | |
|
Dry Spreader w/GSRC Dry?
