|
SOIL | The controller is typically located under the passenger seat, but in the newer tractors, it's even deeper and you have to get under the fuse panel. I'm not sure which yours would be. The easiest way to look is to remove the 4 10mm bolts and lift the fuse panel to look under there. If you have actual work to do on the NAV, then you can remove the passenger seat, the floor mat and undo a few nuts and lift the shroud around everything.
Once you have everything, you will have to get a dealer to come out and install the software to make it work with the tractor. A NAV is not a one-item-fits-all deal. You have to install the software to make it match your tractor, display, receiver, everything.
Just my opinion...while the 700 display may be cheaper to install and will work fine for tillage and anhydrous, if you do or plan in the future any work that requires some real precision work such as planting or side dressing, you will be happier with Ag Leader. The 700 is over 10 years behind what most of their competitors are.
Edited by GcDm2010 10/27/2024 22:03
| |
|
Steiger 350 questions
