|
NW Wisconsin | 40x64x16 clearance with a 24 foot lean too 10 ft clearance on the under the lvl. On the ends I think it goes from 11-13 foot clearance with how I had the trusses made. Wanted to be able to fit a cabbed tractor on the high side. Roof is 3/12 slope with a 6 foot overhang off the front. Building sits on 4' concrete. Wanted something that I can throw steers in and if I gotta work on something real big I can get it in the front or store bales in it. To the bottom of the truss is 17+ feet so tall enough to fit 4 bales on end.
 (Shed (full).jpg)
 (Shed E (full).jpg)
Attachments
----------------
 Shed (full).jpg (188KB - 4 downloads)
Shed E (full).jpg (243KB - 3 downloads)
| |
|
Anticipation is killing me
