|
sw mn | Fought this on a 9255. Not sure if the newer ones are the same but I ended up taking a good silicone caulk and filling the gap on the stainless pieces behind the sickle rock dam area. Where each one locks together there was a 3/8" or so hole and I filled them shut. Before I did this I would have to clean several bushel basket size wads out on both sides on less than 80 acres. I've just done over 600 acres and had to clean out maybe half a bushel basket on one side but i think part of it now is because the belt is wore pretty good down on the seam in the front from all the times of it getting packed full and they are getting under that now. Nothing more frustrating than seeing it quit turning and digging that dusty crap out.
Edited by smallchev 9/26/2024 21:14
 (IMG_20240926_211404 (full).jpg)
Attachments
----------------
 IMG_20240926_211404 (full).jpg (205KB - 36 downloads)
| |
|
Gleaner 9300 (9340) draper belts
