|
Eastern Washington State | I have a new-to-me Apache 1230 sprayer. The sprayer has a Viper 4+ and Raven Hawkeye PWM. I had an issue with getting all the PWM valves to register with the control system, turned out to be a bad relay but in the process of tying to find that out I reset config on the Hawkeye system. This has left me with two problems:
1. The master spray switch on the multifunction handle doesn't seem to work now. Before I reset the config, when I hit the switch the "Master Status" light on the switch box would come on and the display would show sections were applying. Now when I hit the master switch nothing happens and I can't get the sprayer to apply
2. I have fence row nozzles, but I don't know which switches they correspond to in the setup, my switch box has 10 section control switches and two fence row nozzle switches. In the config it asks you to assign those each to 1 of 16 virtual switches. I'm not sure what goes where.
Can anyone point me in a direction to get this figured out? | |
|
Apache Sprayer w/ Raven Viper 4
